| ??? 07/20/06 04:10 Read: times |
#120634 - correction made, still not workin Responding to: ???'s previous message |
As is evident from the code, the output i.e the charector/digit pressed goes out of the serial port. I'm using hyperlink to display the result.The problem is that the any key pressed just sends a 'space'.
ROW0 EQU P1.0
ROW1 EQU P1.1
ROW2 EQU P1.2
ROW3 EQU P1.3
CLMN0 EQU P1.7
CLMN1 EQU P1.6
CLMN2 EQU P1.5
CLMN3 EQU P1.4
DIGIT DATA 30h ;temporary storage of pressed key
org 0000h
ljmp ks_main
org 0030h
;_________________________________________________________________
;---------------SERIAL PORT INITIALISATION STARTS HERE------------------------
;_________________________________________________________________
s9k_main: mov tmod,#20h ;timer_0 in mode2 (8bit auto reload)
mov th1,#0fdh ;set baud to 9600
mov scon,#50h ;serial mode1 (8bit data varialble baud)
setb tr1 ;start timer_0
ret
;--------------SERIAL TRANSMIT SUBROUTINE-------------------------
tx_main: mov sbuf,a
tx_loop: jnb TI,tx_loop
clr TI
ret
;--------------SERIAL RECIEVE SUBROUTINE--------------------------
rx_main: clr a
rx_loop: jnb ri,rx_loop
mov a, sbuf
clr ri
ret
;------------------------------20ms delay----------------------------------
delay_20ms: push 00
push 01
mov r0,#36
delay_20ms_loop1: mov r1,#255
delay_20ms_loop2: djnz r1,delay_20ms_loop2
djnz r0,delay_20ms_loop1
pop 01
pop 00
ret
;_________________________________________________________________
;-------------------------main code------------------------------
;_________________________________________________________________
ks_main: mov p1,#0ffh
mov p1,#0fh ;all columns high n rows low
mov a,p1
acall s9k_main
anl a,#00001111b ;consider only columns
cjne a,#00001111b,ks_main ;initially check for all keys released
;-------------------------------------------------------------------
ks_loop1: acall delay_20ms
mov a,p1
anl a,#00001111b ;scan columns
cjne a,#00001111b,debounce ;if key pressed, check debounce
sjmp ks_loop1 ;if not, keep checking for key pressed
;-------------------------------------------------------------------
debounce: acall delay_20ms
mov a,p1
anl a,#00001111b
cjne a,#00001111b,check_row
sjmp ks_loop1
;--------------------------------------------------------------------
check_row: clr ROW0
setb ROW1
setb ROW2
setb ROW3
mov a,p1
anl a,#01111111b ;test row zero
cjne a,#01111111b,row_0
;--------------------------------------------------------------------
setb ROW0
clr ROW1
setb ROW2
setb ROW3
mov a,p1
anl a,#10111111b ;test row one
cjne a,#10111111b,row_1
;---------------------------------------------------------------------
setb ROW0
setb ROW1
clr ROW2
setb ROW3
mov a,p1
anl a,#11011111b ;test row two
cjne a,#11011111b,row_2
;---------------------------------------------------------------------
setb ROW0
setb ROW1
setb ROW2
clr ROW3
mov a,p1
anl a,#11101111b ;test row three
cjne a,#11101111b,row_3
;----------------------------------------------------------------------
sjmp ks_loop1
;----------------------------------------------------------------------
row_0: mov dptr,#disp_kcode0
sjmp find_num
row_1: mov dptr,#disp_kcode1
sjmp find_num
row_2: mov dptr,#disp_kcode2
sjmp find_num
row_3: mov dptr,#disp_kcode3
sjmp find_num
;----------------------------------------------------------------------
find_num: rrc a
jnc found_num ;which column is pressed/grounded
inc dptr
sjmp find_num
;----------------------------------------------------------------------
found_num: clr a
movc a,@a+dptr
mov DIGIT,a
acall tx_main ;send pressed button to serial port
;-----------------------------------------------------------------------
jmp ks_main
;-----------------------------------------------------------------------
disp_kcode0: DB ' 0 ', ' 1 ', ' 2 ', ' 3 '
disp_kcode1: DB ' 4 ', ' 5 ', ' 6 ', ' 7 '
disp_kcode2: DB ' 8 ', ' 9 ', ' A ', ' B '
disp_kcode3: DB ' C ', ' D ', ' E ', ' F '
;-----------------------------------------------------------------------
end
|
| Topic | Author | Date |
| hex key pad code not working | 01/01/70 00:00 | |
| Explanation | 01/01/70 00:00 | |
| what, how | 01/01/70 00:00 | |
| each line of code must be justified | 01/01/70 00:00 | |
| correction made, still not workin | 01/01/70 00:00 | |
| Lookup table | 01/01/70 00:00 | |
| hyperlink | 01/01/70 00:00 | |
| of course not, | 01/01/70 00:00 | |
| shall I spoil the fun? | 01/01/70 00:00 | |
| code workin partially | 01/01/70 00:00 | |
| be specific | 01/01/70 00:00 | |
| specific | 01/01/70 00:00 | |
| check it in the simulator | 01/01/70 00:00 | |
| Use serial port for debugging | 01/01/70 00:00 | |
| confidence | 01/01/70 00:00 | |
| I wouldn't do that | 01/01/70 00:00 | |
| problem with find_num subroutine? | 01/01/70 00:00 | |
| Code presentation | 01/01/70 00:00 | |
| sorry it's 'hyper terminal' | 01/01/70 00:00 | |
| Problem solved | 01/01/70 00:00 | |
| which conclusion, please tell | 01/01/70 00:00 | |
| Problem is NOT solved. | 01/01/70 00:00 | |
| Post the solution please | 01/01/70 00:00 | |
| solution | 01/01/70 00:00 | |
| a 'killer solution' | 01/01/70 00:00 | |
| killer???? | 01/01/70 00:00 | |
you 'eat' the main | 01/01/70 00:00 |