| ??? 03/18/09 10:04 Modified: 03/18/09 10:04 Read: times |
#163564 - formatted code Responding to: ???'s previous message |
$mod51
org 2000h
start:
clr p3.5 ;for FND common point
mov dptr,#lookup
x1a: clr a
movc a,@a+dptr
x2a: mov p1,a
call delay500ms
call delay500ms
inc dptr
jmp x1a
;-----------------------------------
delay500ms:
call delay100ms
call delay100ms
call delay100ms
call delay100ms
call delay100ms
ret
delay100ms:
mov r7,#100
x4: call delay1ms
djnz r7,x4
ret
delay1s:
mov r6,#10
x5: call delay100ms
djnz r6,x5
ret
delay1ms:
mov r2,#10
x3: mov r1,#49
x2: djnz r1,x2
djnz r2,x3
ret
;----------------------------------------------------------------
;COMMON ANODE TYPE LOOKUP TABLE
lookup: ;org 2500h
db "A" "B" "C"
end
|
| Topic | Author | Date |
| "FND Display " | 01/01/70 00:00 | |
| formatted code | 01/01/70 00:00 | |
| What is FND display? | 01/01/70 00:00 | |
| FND picture | 01/01/70 00:00 | |
| where did you get that name from? | 01/01/70 00:00 | |
| It's a Fairchild prefix | 01/01/70 00:00 | |
Thanks... | 01/01/70 00:00 | |
| 7-Segment Lookup Table - Example | 01/01/70 00:00 | |
| pattern not ASCII | 01/01/70 00:00 | |
| Plz ... | 01/01/70 00:00 | |
| A bit of summing up for you to do | 01/01/70 00:00 | |
| Also check for CA/CC | 01/01/70 00:00 | |
| source/sink | 01/01/70 00:00 | |
| Clarification: Segments and Bits | 01/01/70 00:00 | |
| Vijay, | 01/01/70 00:00 | |
| If you want characters, then use characters! | 01/01/70 00:00 | |
| Hardware? | 01/01/70 00:00 |