I programmed a Philips 87LPC767 using a Keil Compiler and GALEP III.

Problem:
After Reset all Port Pins should be high (The PRHI-Bit is set to 1), but Pin 9(P1.3/SDA) and Pin 10(P1.2/SCL) aren´t.

Configuration Bytes:
UCFG1 (FD00h): 0x78
UCFG2 (FD01h): 0xC0

I tried it with 3 different controllers, and it has always the same effect.

Some ideas?

Thanks

Günter