| ??? 02/27/03 10:49 Read: times |
#40209 - RE: 8051 Serial UART problem Responding to: ???'s previous message |
I found this basic example on the web..
hope it helps <html>
/*************************************************************************
* int.c - A demonstration of how to write interrupt-driven code for an
* 8051 using the Keil C compiler. The same techniques may work in other
* 8051 C compilers with little or no modifcation. This program will
* combine the functionality of both basic.c and serial.c to allow serial
* communications to be entirely in the background, driven by the serial
* interrupt. This allows the main() function to count on Port 0 without
* being aware of any ongoing serial communication.
*/
/* included headers */
#include <reg51.h>
/* function declarations */
char getCharacter (void); /* read a character from the serial port */
void sendCharacter (char); /* write a character to the serial port */
/*
* Interrupt handlers:
* Here the code for the interrupt handler will be placed. In this
* example, a handler for the serial interrupt will be written.
* Examination of the 8051 specs will show that the serial interrupt is
* interrupt 4. A single interrupt is generated for both transmit and
* receive interrupts, so determination of the exact cause (and proper
* response) must be made within the handler itself.
* To write an interrupt handler in Keil, the function must be declared
* void, with no parameters. In addition, the function specification
* must be followed by a specification of the interrupt source it is
* attached to. The "using" attribute specifies which register bank
* to use for the interrupt handler.
*/
void serial_int (void) interrupt 4
{
static char chr = ' '; /* character buffer */
/*
* The interrupt was generated, but it is still unknown why. First,
* check the RI flag to see if it was because a new character was
* received.
*/
if (RI == 1) /* it was a receive interrupt */
{
chr = SBUF; /* read the character into our local buffer */
RI = 0; /* clear the received interrupt flag */
TI = 1; /* signal that there's a new character to send */
}
else if (TI == 1) /* otherwise, assume it was a transmit interrupt */
{
TI = 0; /* clear the transmit interrupt flag */
if (chr != ' ') /* if there's something in the local buffer... */
{
if (chr == 'r') chr = 'n'; /* convert <CR> to <LF> */
SBUF = chr; /* put the character into the transmit buffer */
chr = ' ';
}
}
}
/* functions */
/*************************************************************************
* main - Program entry point. This program sets up the timers and
* interrupts, then simply receives characters from the serial port and
* sends them back. Notice that nowhere in the main function is Port 0
* incremented, nor does it call any other function that may do so.
* main() is free to do solely serial communications. Port 0 is handled
* entirely by the interrupt handler (aside from initialization).
*
* INPUT: N/A
* RETURNS: N/A
*/
main()
{
/* Before the serial port may be used, it must be configured. */
/* Set up Timer 0 for the serial port */
SCON = 0x50; /* mode 1, 8-bit uart, enable receiver */
TMOD = 0x20; /* timer 1, mode 2, 8-bit reload */
TH1 = 0xFE; /* reload value for 2400 baud */
ET0 = 0; /* we don't want this timer to make interrupts */
TR1 = 1; /* start the timer */
TI = 1; /* clear the buffer */
/*
* The compiler automatically installs the interrupt handler, so
* all that needs to be done to use it is enable interrupts. First,
* speficially enable the serial interrupt, then enable interrupts.
*/
ES = 1; /* allow serial interrupts */
EA = 1; /* enable interrupts */
/* initialize Port 0 to 0, as in basic.c */
P0 = 0;
/*
* Loop forever, increasing Port 0. Again, note nothing is done
* with the serial port in this loop. Yet simulations will show
* that the software is perfectly capable of maintaining serial
* communications while this counting proceeds.
*/
while (1==1)
{
unsigned int i;
for (i = 0; i < 60000; i++) {;} /* delay */
P0 = P0 + 1; /* increment Port 0 */
}
}
</html> |
| Topic | Author | Date |
| 8051 Serial UART problem | 01/01/70 00:00 | |
| RE: 8051 Serial UART problem | 01/01/70 00:00 | |
| RE: 8051 Serial UART problem | 01/01/70 00:00 | |
| RE: 8051 Serial UART problem | 01/01/70 00:00 | |
| RE: 8051 Serial UART problem | 01/01/70 00:00 | |
| RE: 8051 Serial UART problem | 01/01/70 00:00 | |
| RE: 8051 Serial UART problem | 01/01/70 00:00 | |
RE: 8051 Serial UART problem | 01/01/70 00:00 |