| ??? 11/20/04 17:14 Read: times |
#81583 - I use ascii Responding to: ???'s previous message |
As Andy says i use the tranlated to ascii values.
And...if you are reading an 12 bits converter; Why do you send 4 bytes? You need only 1 and a half. Or: Send the data in two bytes: The first with the high bit set to 1, the second with the high bit set to 0. Then you still have 7 and 7 bits for your data. Check if the value is higher than 128 and get the following byte and operate the datas to get your number. |
| Topic | Author | Date |
| Need help... MCU and PC communication | 01/01/70 00:00 | |
| MCU & PC communication | 01/01/70 00:00 | |
| I have the same problem | 01/01/70 00:00 | |
| Need more help from this | 01/01/70 00:00 | |
| I use ascii | 01/01/70 00:00 | |
| Reply to Jose' | 01/01/70 00:00 | |
| Fix the problem | 01/01/70 00:00 | |
| To my helpers | 01/01/70 00:00 | |
| Handshaking... | 01/01/70 00:00 | |
| RETI | 01/01/70 00:00 | |
| ascii ? | 01/01/70 00:00 | |
| Handshaking and More !! | 01/01/70 00:00 | |
| Delays | 01/01/70 00:00 | |
| Thanks to all my helpers, problem solved | 01/01/70 00:00 | |
| Delays | 01/01/70 00:00 | |
| Delays | 01/01/70 00:00 | |
| UART, mode 3 | 01/01/70 00:00 | |
| The 9th bit is the parity for VB | 01/01/70 00:00 | |
| send data from mcu to pc | 01/01/70 00:00 | |
| Yes, but the 9th bit is the parity in VB | 01/01/70 00:00 | |
| 9th bit lost by Windoze? | 01/01/70 00:00 | |
| 9th bit is supported | 01/01/70 00:00 | |
32-bit MS Windows | 01/01/70 00:00 |