| ??? 07/09/07 17:17 Read: times |
#141646 - Nearly Responding to: ???'s previous message |
Eddy Ys said:
I found you to be the most genious amongst so many experts here. Thank you very much! This can be set with AT command AT+IPR=xxx<CR><LF> Actually, that should be just CR - without LF. To be really pedantic, it should be, "the command termination character specified by register S3" (of course, register S3 usually contains 0x0D - for CR!) It can be set to be "auto detect" as well with the AT command AT+IPR=0<CR><LF> Again, just CR (no LF) See: http://www.keil.com/forum/docs/thread9483.asp Note that setting AT+IPR=0 (ie, Autobaud) has some side-effects - particularly regarding messages sent at startup... |
| Topic | Author | Date |
| [Help] AT89C51 with GSM MC35i terminal problem | 01/01/70 00:00 | |
| testing and troubleshooting | 01/01/70 00:00 | |
| Simulated using 8051IDE | 01/01/70 00:00 | |
| RTFM! | 01/01/70 00:00 | |
| MC35i or MC35i Terminal? | 01/01/70 00:00 | |
| Not entirely true | 01/01/70 00:00 | |
| It is Siemens MC35i terminal | 01/01/70 00:00 | |
| Wrong connections | 01/01/70 00:00 | |
| What is IGT? | 01/01/70 00:00 | |
| IGT | 01/01/70 00:00 | |
| power supply? | 01/01/70 00:00 | |
| Stop!! | 01/01/70 00:00 | |
| Providing IGT | 01/01/70 00:00 | |
| Right | 01/01/70 00:00 | |
| I'm done with it. | 01/01/70 00:00 | |
| Manual reading time | 01/01/70 00:00 | |
| Must add the 2 more signal | 01/01/70 00:00 | |
| No, that's not right | 01/01/70 00:00 | |
| MC35i was siemens GSM modem module | 01/01/70 00:00 | |
| Pardon?? | 01/01/70 00:00 | |
| baudrate 9600? | 01/01/70 00:00 | |
| Not necessarily | 01/01/70 00:00 | |
| m35i with uC.. | 01/01/70 00:00 | |
| I think ur using wrong baud rate | 01/01/70 00:00 | |
| Wrong | 01/01/70 00:00 | |
| Andy Neil is really someone | 01/01/70 00:00 | |
Nearly | 01/01/70 00:00 |