| ??? 09/22/08 11:58 Read: times |
#158501 - I should also add Responding to: ???'s previous message |
the debug file from escademy shows that 4 bytes appear to be dropping during the programming phase, I can post that up later, I don't have my laptop on right now. But the .hex file is only 62 bytes (blinky) to keep it simple.
The other commands (device id, blank check) are all way longer than 62 bytes, yet they work with no issue, only when a programming needs to be done. I've also added the VDD switch and increased the capability so that there is 3.245V on the VDD pin of the IC, which should now be well in range for the % of deviation of VDD minimum limits.....so no longer is it enough power supply for the issue. Thanks |
| Topic | Author | Date |
| Question for ErikM ICP bridge hardware | 01/01/70 00:00 | |
| no idea, sorry | 01/01/70 00:00 | |
| I've also posted the same question at Keil | 01/01/70 00:00 | |
| i think you would be better off ... | 01/01/70 00:00 | |
| ICP tips | 01/01/70 00:00 | |
| Ok a weird issue has come up | 01/01/70 00:00 | |
| Here is a better description and exact issue.... | 01/01/70 00:00 | |
| I should also add | 01/01/70 00:00 | |
Here is the return data stream echo | 01/01/70 00:00 |