| ??? 11/28/08 07:44 Read: times |
#160356 - ouput voltage when pin is pulled low |
I am using 8051F340 and I am outputting 0 to port 2. The code and the cicuit works fine, but when I accidentally checked the pin voltage I noticed that, 2 out of 8 pins have voltage levels of 0.92 and the rest have 0.4 volts. This is the first time I am seeing 0.92 volts as low, that too for 3.3 volts device. Is this normal? |
| Topic | Author | Date |
| ouput voltage when pin is pulled low | 01/01/70 00:00 | |
| Check the datasheet | 01/01/70 00:00 | |
| Different VOLs? | 01/01/70 00:00 | |
| Why not? | 01/01/70 00:00 | |
| Always variances | 01/01/70 00:00 | |
| Shouldn't be that different! | 01/01/70 00:00 | |
| the thing in the datasheet everybody misses | 01/01/70 00:00 | |
| Within limits but.. | 01/01/70 00:00 | |
| AT 25 mA!!! | 01/01/70 00:00 | |
| Average | 01/01/70 00:00 | |
| Not modulating the pin! | 01/01/70 00:00 | |
| ...any low is a fine low! | 01/01/70 00:00 | |
| 'some' may not be a problem .... | 01/01/70 00:00 | |
| Of course, but... | 01/01/70 00:00 | |
| No, it is not fine! | 01/01/70 00:00 | |
no, it is not | 01/01/70 00:00 |