Hi Andy,


I call from 5s TIC interrupt:

void TIC_int () interrupt 10
{
	printf("Data 1:%un",data1);               //Output result to UART
 	printf("Data 2:%un",data2);   	            //Output result to UART
 	printf("Data 3:%un",data3);      //Output result to UART
}
main()
{
 				//Configure UART
   	T3CON = 0x83;      	//9600 Baud rate
    	T3FD = 0x12;
    	SCON = 0x52;
        PCON = 0x10;		//ALE OFF

//Configure TIC
	IEIP2 = 0x04;   	//Enable TIC interrupt
	EA = 1;         	//Enable global interrupts
	TIMECON = 0xD0; 	//Count in seconds
	INTVAL =  0x05; 	//Count duration (5 second delay between temperature readings)
	delay(10000);		//Delay to allow TIC registers be written
}