| ??? 10/03/05 14:49 Read: times |
#101852 - Ask Sebastian Responding to: ???'s previous message |
Erik Malund said:
A very rounabout way, why not (ISP) program the internal flash in the first place? Of course, you can remove the external flash, program it and then copy it to the internal on the board, but why 17 steps instead of 1? Ask not me, ask Sebastian. He want a solution without hardware and this is one. But I telled never, that such an approach was useful. Peter |
| Topic | Author | Date |
| AT89C51ED2 and external EEPROM | 01/01/70 00:00 | |
| If serial, try a write and a read, if pa | 01/01/70 00:00 | |
| some comments | 01/01/70 00:00 | |
| why "of course" most is serial | 01/01/70 00:00 | |
| I don't need 128K programm memory | 01/01/70 00:00 | |
| if it is not used, you can not detect it | 01/01/70 00:00 | |
| I must to do it by software | 01/01/70 00:00 | |
| You should have thought of that before y | 01/01/70 00:00 | |
| Re: hardware required | 01/01/70 00:00 | |
| leave harvard structure! | 01/01/70 00:00 | |
| it depends | 01/01/70 00:00 | |
| no meaning | 01/01/70 00:00 | |
| Software solution | 01/01/70 00:00 | |
| Sure, but why? | 01/01/70 00:00 | |
| Ask Sebastian | 01/01/70 00:00 | |
| Please explain further | 01/01/70 00:00 | |
| some explayning | 01/01/70 00:00 | |
| Use other device | 01/01/70 00:00 | |
XDATA? | 01/01/70 00:00 |