| ??? 01/16/13 20:02 Read: times |
#189199 - also try no LM810 at all Responding to: ???'s previous message |
Koen De Ganck said:
... 1 extra HC port load
What exactly does this mean ? - Is something else starting at the same time ? Does that depend on the reset thresholds, or reset exit times ? Try power-up with nothing connected to the reset at all. I just tried 20+ cycles on a LP51ID2, floating RESET pin, with zero por failures, and noisy power cycles.. I suspect 'something else' is happening here. |
| Topic | Author | Date |
| Reset issue with new Atmel AT89LP51ED2 | 01/01/70 00:00 | |
| Do never use a µC from which only a preliminary... | 01/01/70 00:00 | |
| configuration settings | 01/01/70 00:00 | |
| what about negative reset? | 01/01/70 00:00 | |
| good idea but | 01/01/70 00:00 | |
| Some things to check... | 01/01/70 00:00 | |
| also try no LM810 at all | 01/01/70 00:00 | |
| reset is inverted | 01/01/70 00:00 | |
| no strange signals | 01/01/70 00:00 | |
| Extra modes ? | 01/01/70 00:00 | |
| pull-up on PSEN solves the problem | 01/01/70 00:00 | |
| small capacitor ? | 01/01/70 00:00 | |
| small capacitor | 01/01/70 00:00 | |
| side-stepping the problem? | 01/01/70 00:00 | |
| SST could be an option | 01/01/70 00:00 | |
| final status AT89LP51ED2 reset | 01/01/70 00:00 | |
| Clarifies | 01/01/70 00:00 | |
| loads on PSEN | 01/01/70 00:00 | |
| An isolated PSEN works fine ? | 01/01/70 00:00 | |
| GAL causes problem | 01/01/70 00:00 | |
| ATF16V8CZ has Pin-keeper | 01/01/70 00:00 | |
| 'Z' indeed | 01/01/70 00:00 | |
| ATF16V8BQL has Icc of ~1.5mA | 01/01/70 00:00 | |
'BQL' version could be an option | 01/01/70 00:00 |