| ??? 02/26/09 23:10 Read: times |
#162919 - Indeed! But useless for anything else. Responding to: ???'s previous message |
I suspect it's because he's using dull tools and perhaps using them entirely too long. The software probably doesn't allow him to hurry the feed rate, else that's a suspect, too. It's not my choice, and, God be thanked, not my worry.
He produces pretty good boards, drills holes down to 5 mils, registers his solder mask to well within 0.1 mm, and gets his multilayer boards to work. Of course, he produces that stuff chemically. I get my boards from the PRC, and they cost much less than what I have to pay here, and they're right the first time, and electrically tested. The local guys get it right ... eventually ... <sigh> ... but not soon enough, and they can't easily produce the 3-mil tracks on 6-mil centers, and can't register layers or mask any closer than 3 mils, which is what folks claimed 15 years ago. That's why I wire-wrap the stuff I have to have "today." RE |
| Topic | Author | Date |
| PCB prototype | 01/01/70 00:00 | |
| How does the LPKF machine do as a drill? | 01/01/70 00:00 | |
| tool life | 01/01/70 00:00 | |
| Well, I just guessed ... | 01/01/70 00:00 | |
| Expensive Drill | 01/01/70 00:00 | |
| Indeed! But useless for anything else. | 01/01/70 00:00 | |
| Expensive? Yes. Useless? ... | 01/01/70 00:00 | |
| True enough! | 01/01/70 00:00 | |
| Dull Tools | 01/01/70 00:00 | |
| dull tools | 01/01/70 00:00 | |
| 10 mil end mills | 01/01/70 00:00 | |
| Wet ? | 01/01/70 00:00 | |
| Air cooled only | 01/01/70 00:00 | |
| Plating?? | 01/01/70 00:00 | |
| plating | 01/01/70 00:00 | |
| I figured as such | 01/01/70 00:00 | |
| very good quality | 01/01/70 00:00 | |
| Impressive but.. | 01/01/70 00:00 | |
| Prototyping prices | 01/01/70 00:00 | |
| Very interesting approach | 01/01/70 00:00 | |
| PCBExpress | 01/01/70 00:00 | |
| Sunstone Circuits | 01/01/70 00:00 | |
| Sunstone | 01/01/70 00:00 | |
| P.S. Welcome back | 01/01/70 00:00 | |
Now-a-days... | 01/01/70 00:00 |