| ??? 11/29/05 16:07 Read: times |
#104367 - Atmel's ISP system Responding to: ???'s previous message |
Kai Klaas said: Peter said:
Additionally to the ISP tool, which you can buy ready built from atmel, you will need the free isp software. Also, you will at least need a simple editor, to write the program, and an assembler, which translates what who you have written with the editor into machine code. Concretely spoken a hex-file is created. This hex-file is needed by the ISP software to do the programming. Kai You mean the C compiler that came with the PJRC dev board isn't adequate/compatible? Peter. |
| Topic | Author | Date |
| From PJRC board to breadboard? | 01/01/70 00:00 | |
| Go to www.pjrc.com again | 01/01/70 00:00 | |
| Building 89C2051 ICP on PJRC dev board | 01/01/70 00:00 | |
| I would recommend you... | 01/01/70 00:00 | |
| Atmel's ISP system | 01/01/70 00:00 | |
| Re | 01/01/70 00:00 | |
| Atmel's ISP system | 01/01/70 00:00 | |
| If it is either of those there is no com | 01/01/70 00:00 | |
| Breadboarding | 01/01/70 00:00 | |
| just be aware | 01/01/70 00:00 | |
| Breadboarding | 01/01/70 00:00 | |
| same restrictions | 01/01/70 00:00 | |
| What you need is a solid ground plane | 01/01/70 00:00 | |
a better solution often is to purchase a | 01/01/70 00:00 | |
| hex-file is needed | 01/01/70 00:00 | |
| Flat cable? | 01/01/70 00:00 | |
| Flat cable | 01/01/70 00:00 |