| ??? 04/22/06 10:03 Read: times |
#114737 - I2C Code Responding to: ???'s previous message |
As far as I understand the code in link above is explicitly written for 8xC554 series of philips microcontrollers. I'm not sure if they work with normal 8Xc52 series. You must get an ordinary C implementation of I2C protocol which can be found in many sites. You don't need to use interrupts to drive an I2C bus. Once you can read/write through I2C bus the rest with DS1307 is quite easy. |
| Topic | Author | Date |
| How to enable the oscillator in RTC? | 01/01/70 00:00 | |
| I2C Code | 01/01/70 00:00 | |
| SMBus include SCL and SDA lines | 01/01/70 00:00 | |
| derivative or deviate? | 01/01/70 00:00 | |
| I2C RTC | 01/01/70 00:00 | |
| be careful | 01/01/70 00:00 | |
| I2C program and controller | 01/01/70 00:00 | |
| since you are using a derivative (F120) | 01/01/70 00:00 | |
| I used the Code Architect....Erik Sir, | 01/01/70 00:00 | |
| Lost in confusion. | 01/01/70 00:00 | |
| the confooosion is ... | 01/01/70 00:00 | |
| To display time | 01/01/70 00:00 | |
| is reading that tough, evidently it must | 01/01/70 00:00 | |
| I2C RTC Interfacing with 8051 | 01/01/70 00:00 | |
| horsefeathers | 01/01/70 00:00 | |
| My position in this I2C RTC.... | 01/01/70 00:00 | |
| yes, after 15 minutes | 01/01/70 00:00 | |
| Three issues | 01/01/70 00:00 | |
| yes,after 15 minutes... | 01/01/70 00:00 | |
| More specifically.... | 01/01/70 00:00 | |
| use the debugger | 01/01/70 00:00 | |
| Thank you ... | 01/01/70 00:00 | |
Persistance wins again | 01/01/70 00:00 |