Hi,

I need to use timer 2 to generate the baud rate for the serial port on the OKI 80C154.
I need to know what to set the RCLK and TCLK values to - whether I set them both to 1, or whether I set TCLK to 1 (and RCLK to 0) before sending and RCLK to 1 (and TCLK to 0) before receiving.
I think I just need set them both to 1, but i'm not 100% sure.

Also, due to my assembler not recognising Timer 2, to access T2CON do I just do a:

MOV 0C8h,#XXX

and for independantly accessing TCLK and RCLK is it:

SETB 0C8h.4
CLR 0C8h.5

I'm very new to assembly, so any help would be appreciated.

George