| ??? 10/14/04 00:34 Read: times |
#79296 - RE: Getting low voltage reference. Responding to: ???'s previous message |
Alan said:
Suppose I need to get a reference voltage somewhere around 100mV, what should I do? Hallo Alan, a simple voltage divider built from two precision resistors could do the job. And if low source impedance of your reference voltage generator is needed, you could use a stable operational amplifier as buffer or even a 'chopper', if offset voltage is an issue. What is your application? Kai |
| Topic | Author | Date |
| Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V, Erik, Kiran | 01/01/70 00:00 | |
| RE: Need 5V, Erik, Kiran => Kai | 01/01/70 00:00 | |
| RE: RE: Need 5V, Erik, Kiran => Kai | 01/01/70 00:00 | |
| Getting low voltage reference. | 01/01/70 00:00 | |
| RE: Getting low voltage reference. | 01/01/70 00:00 | |
| RE: Getting low voltage reference. | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| LM50 is terribly unprecise! | 01/01/70 00:00 | |
| RE: LM50 is terribly unprecise! | 01/01/70 00:00 | |
KTY11-5 could be used | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 |