| ??? 10/14/04 14:38 Read: times Msg Score: -1 -1 Answer is Wrong |
#79320 - RE: Need 5V for Ref. ADC0808 Responding to: ???'s previous message |
I think you can do it much simply. Just use another LM78L05 or TL317 with paraller condenser 100uF/16V :). Remember to use tantal clamp condenser aproximetly 220 uF/25V nearly as passible to VCC +5V of uPC.
It s realy simpy and work quite good. Clousure TO-92 is a little. Jdsoul. |
| Topic | Author | Date |
| Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V, Erik, Kiran | 01/01/70 00:00 | |
| RE: Need 5V, Erik, Kiran => Kai | 01/01/70 00:00 | |
| RE: RE: Need 5V, Erik, Kiran => Kai | 01/01/70 00:00 | |
| Getting low voltage reference. | 01/01/70 00:00 | |
| RE: Getting low voltage reference. | 01/01/70 00:00 | |
| RE: Getting low voltage reference. | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| LM50 is terribly unprecise! | 01/01/70 00:00 | |
| RE: LM50 is terribly unprecise! | 01/01/70 00:00 | |
KTY11-5 could be used | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 | |
| RE: Need 5V for Ref. ADC0808 | 01/01/70 00:00 |