| ??? 04/07/05 23:36 Read: times |
#91228 - door lock diagram Responding to: ???'s previous message |
Hello Joshua,
You can interface your 80C51 to the solenoid using the below diagram (http://members.aol.com/cpu8052/doorlock.gif). You have to activate on of your port pins to logical low for about 1/2 second which will pull in say relay 1. The solenoid will pick up. Activating the other port pin to a logical low for about 1/2 second will pull in say relay 2. The solenoid will actuate the reverse way because the current flow thru it is opposite. Good Luck, Regards, Charles Bannister REFERENCE http://www.the12volt.com/doorlocks/page3.asp 
 |
){kind=link}
| Topic | Author | Date |
| Driving 12V Relay W/ 8051 | 01/01/70 00:00 | |
| Ammended Image Post | 01/01/70 00:00 | |
| that get you nowhere. | 01/01/70 00:00 | |
| A few things | 01/01/70 00:00 | |
| No, that is not so. | 01/01/70 00:00 | |
| an 8751, perhaps | 01/01/70 00:00 | |
| Pull Ups and Base Current | 01/01/70 00:00 | |
| ULN2003 | 01/01/70 00:00 | |
| door lock diagram | 01/01/70 00:00 | |
| One more method... | 01/01/70 00:00 | |
| Why not use 2N7000 | 01/01/70 00:00 | |
| 2N7000 Not Good By Itself | 01/01/70 00:00 | |
| You have a point | 01/01/70 00:00 | |
| FET solution | 01/01/70 00:00 | |
| Elegant? | 01/01/70 00:00 | |
| True.. | 01/01/70 00:00 | |
| It Can Be Small | 01/01/70 00:00 | |
| Zetex | 01/01/70 00:00 | |
| Could it be smaller? | 01/01/70 00:00 | |
| Think so. | 01/01/70 00:00 | |
| Onboard Resistors | 01/01/70 00:00 | |
| Digital transistors | 01/01/70 00:00 | |
Missed | 01/01/70 00:00 | |
| an added note | 01/01/70 00:00 | |
| solved by Allegro | 01/01/70 00:00 | |
| part number for Allegro chip? | 01/01/70 00:00 | |
| take your pick | 01/01/70 00:00 | |
| I missed a few | 01/01/70 00:00 | |
| It was a note :) | 01/01/70 00:00 |