| ??? 02/28/05 20:46 Read: times |
#88694 - LM628 Responding to: ???'s previous message |
Dear Mr. STEVE,
I am generating the clock from 8051 only. I can see Lm628 becoming busy and comming out of the loop when bit 0 get's cleared. I did few changes in code. let me list it as below. On power-ON , I reset the LM628, then I am using 3 different keys. First key is used to issue an RSTI Second to Load the filter command Third is to load the trajectory command. When ever RSTI (followed by 0x0000) command is issued , I get the status as 0x00, but as soon as I read any other register I get 0xC4, But when I load the trajectory command I get 198 ie (0xC6), which says command error. I really dont understand whats wrong here Only the ENCODER is connected to the LM628 PCB. Regards K.Ganesh |
| Topic | Author | Date |
| software problems interfacing with LM628 | 01/01/70 00:00 | |
| Sure ? | 01/01/70 00:00 | |
| addressed to Mr STEVE , LM628 | 01/01/70 00:00 | |
| Kind attn Mr. STEVE, LM628 | 01/01/70 00:00 | |
| sanity checks. | 01/01/70 00:00 | |
| LM628 | 01/01/70 00:00 | |
| Far as I can go. | 01/01/70 00:00 | |
| Problem still not solved | 01/01/70 00:00 | |
| Clock generation | 01/01/70 00:00 | |
| Read the datasheet | 01/01/70 00:00 | |
| expanding | 01/01/70 00:00 | |
| expanding | 01/01/70 00:00 | |
| To all of you guys, who tried helping me | 01/01/70 00:00 | |
| I might have code for the LM629 | 01/01/70 00:00 | |
| posting code and staying cool | 01/01/70 00:00 | |
LM 629 codes-working... | 01/01/70 00:00 |