Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
05/24/07 18:47
Read: times


 		 #139776 - assembler
Responding to: ???'s previous message

Hi all,

Thanks for your help. I am referring to assembler (sorry about the 'compiler' that I had mentioned before).
I have the assembler link set as
Save This Code
 
C:\SiLabs\MCU\IDEfiles\C51\BIN\a51.exe


I had assigned '41h' to MISC_FLAGS and not '41' :)
Bdata will not help me in assembler. I need help in compiling this code in assembler.

Save This Code
; initialize the byte as 8 bit variable.

MISC_FLAGS EQU	41h ; BIT ADDRESSABLE.
		   ; BIT 0: KB ENABLED; SET AT FE ACK
	           ; BIT 1: INTERNAL BEEP SUPPRESSED
		   ; BIT 2: RE-START
		   ; BIT 3: THE FIRST "FD" OF THE PACKET HAS  COME FROM MAIN PROCESSOR
		   ; BIT 4: IF SET FUNCTION IS RECEIVED FOR PACKETIZED MODE 
		   ; BIT 5: IF SET FIRST "FD" HAS BEEN TRANSMITTED	FROM Q2		
		   ; BIT 6: IF SET ADDRESS IS RECEIVED FOR PACKETIZED MODE	
		   ; BIT 7: PACKETIZED MODE

....
....




later in my code I could use this byte as a bit. 

TX_QUEUE1:JB  MISC_FLAGS.7,TX_QPACKET ; JIF 'PACKET CODE' RECEIVED
PUT_C1:	JB MISC_FLAGS.5,TX_QPACKET  ;JIF IN THE MIDDLE OF SENDING Q2 PACKETS  

TX_QPACKET: ret







List of 24 messages in thread
TopicAuthorDate
Byte used as bit            01/01/70 00:00      
   which compiler?            01/01/70 00:00      
      Silabs IDE            01/01/70 00:00      
         and was this inline assembler in C-program?            01/01/70 00:00      
            No, not an assembler in C            01/01/70 00:00      
         SILabs IDE is NOT a compiler            01/01/70 00:00      
            I was just referring to the IDE used.            01/01/70 00:00      
               Terminology            01/01/70 00:00      
                  Assuming The Keil C Compiler            01/01/70 00:00      
                     No, that's wrong            01/01/70 00:00      
                        So much for the manual            01/01/70 00:00      
                           Yes, that's it!            01/01/70 00:00      
                              assembler            01/01/70 00:00      
                                 assembling not compiling            01/01/70 00:00      
                                 MISC_FLAGS EQU 20h            01/01/70 00:00      
                                    re:MISC_FLAGS EQU 20h            01/01/70 00:00      
                                       Bytes as bits            01/01/70 00:00      
                                          stop expreimenting, read the manual            01/01/70 00:00      
                                          Or use Acc            01/01/70 00:00      
                  Accurate terminology            01/01/70 00:00      
               C51.exe            01/01/70 00:00      
               No and definitely not            01/01/70 00:00      
   Check Byte Address            01/01/70 00:00      
      i do not recall            01/01/70 00:00      

Back to Subject List