| ??? 10/31/03 07:52 Read: times |
#57567 - RE: 100 to 3600 RPM - Babar Responding to: ???'s previous message |
"If your gadget is only one time, use extra hardware for the display for high productions do it in your code."
Nice to hear what I WANT to hear !! Yes you are right - this is a one off requirement and the add on cost for a 7218 display driver is not an issue. And more so when I can not introduce more segments or holes int he available setup to increase the pulses / revolution. Thanks Raghu |
| Topic | Author | Date |
| 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM - Babar | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM - Peter | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM - Peter | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM - two notes | 01/01/70 00:00 | |
| it's a dirty job | 01/01/70 00:00 | |
| RE: it's a dirty job - Erik | 01/01/70 00:00 | |
| RE: it's a dirty job - Erik | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
| RE: 100 to 3600 RPM | 01/01/70 00:00 | |
RE: 100 to 3600 RPM | 01/01/70 00:00 |