Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
09/28/05 12:20
Read: times


 
#101658 - you have created just about the worst co
Responding to: ???'s previous message
3) what size are the pullup resistors ?
3) 4.7k Ohm

5) how far are the uC and the max6956 apart ?
5) Maybe 16 inches via the jumper wires I'm using.

6) the MAX6956 I have plugged into a breadboard.


you have created just about the worst conditions under which to run IIC. you have very large stray capacitances and high value resistors I doubt the bus ever get high in time.

4) does other things the uC do work?
4) ? I don't understand what you are asking here.

Does your program e.g. blink a LED or some such thing that works


before you go on, study this one
http://www.semiconductors.philips.com/acrobat_d...h_2003.pdf

Is basically an IIC "bible". If you are on dialup, download overnight it's 2.7 Mb

Erik


List of 29 messages in thread
TopicAuthorDate
Using IIC.ASM            01/01/70 00:00      
   address, speed            01/01/70 00:00      
      Yes            01/01/70 00:00      
   two things            01/01/70 00:00      
      Is HW I2C easier?            01/01/70 00:00      
         That may have been true then, this is no            01/01/70 00:00      
            Replies.            01/01/70 00:00      
               Check SBCMON            01/01/70 00:00      
                  SBCMON            01/01/70 00:00      
                     try a serial memory            01/01/70 00:00      
                     let us try another tack            01/01/70 00:00      
                        another tack.            01/01/70 00:00      
                           you have created just about the worst co            01/01/70 00:00      
                              Worst conditions.            01/01/70 00:00      
                                 oscilloscope            01/01/70 00:00      
                                    oscilloscope            01/01/70 00:00      
                                 To verify that your programming ("burnin            01/01/70 00:00      
                                    verifying.            01/01/70 00:00      
                                       Without a scope you are kind of stuck, s            01/01/70 00:00      
                                          Success.            01/01/70 00:00      
                                       back to the roots            01/01/70 00:00      
                                          Success.            01/01/70 00:00      
               To Mike!            01/01/70 00:00      
                  Hello Mehdi            01/01/70 00:00      
                     Or...            01/01/70 00:00      
                        this is a bootleg, use the original            01/01/70 00:00      
                        i2cbits            01/01/70 00:00      
                           you may want to go here            01/01/70 00:00      
   Clock width is only 2 uSec in IIC_ASM ex            01/01/70 00:00      

Back to Subject List