Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
01/19/05 19:47
Read: times


 
#85330 - Seems to be an impossible situation
Responding to: ???'s previous message
Dear Rob:

You're using a 2SC1815 .......( you said that ).

You've a 5k base resistor.

You've a 10k from colector to +12Vcc.

All that must work !

1- You're naming "gate" the base of transistor, so let me ask you, if your Generator/MCU GND is the same of the 12Vcc Gnd, and if the emitter of the transistor is connected to the common GND?

2- What port are you using to controll the transistor ?? ...I hope not to be P0. ( it's an open collector ).
Or....Are you sure that the DC level of your generator goes from 0-Vcc to 5-Vcc ? How did you measure that on oscilloscope ?
in DC or AC ?

3- Did you try again .......
You said that:
While i am using a normal (common) squarewave output to the gate the output is being amplified correctly


Perhaps now you've base-emitter open, so your TR died. check again all please, and Good luck !!!

Alberto.

List of 36 messages in thread
TopicAuthorDate
amplifying port output signal to 12v dc            01/01/70 00:00      
   Transistor driving            01/01/70 00:00      
   use an op-amp            01/01/70 00:00      
      Hardly -            01/01/70 00:00      
   Tell us the name            01/01/70 00:00      
      micro and transistor            01/01/70 00:00      
         RTFM            01/01/70 00:00      
         Atmel T89C51CC02            01/01/70 00:00      
            it should be fine            01/01/70 00:00      
               Both of them.            01/01/70 00:00      
            stop guessing            01/01/70 00:00      
         Seems to be an impossible situation            01/01/70 00:00      
            Seems to me            01/01/70 00:00      
               thats right            01/01/70 00:00      
                  google            01/01/70 00:00      
                     i have the data sheet            01/01/70 00:00      
                        maximum            01/01/70 00:00      
                  OK That's right but...            01/01/70 00:00      
   Load Lines            01/01/70 00:00      
   Basic transistor theory            01/01/70 00:00      
      5 volt wave to base            01/01/70 00:00      
         TTL ?            01/01/70 00:00      
         maybe it's an error...            01/01/70 00:00      
            yes            01/01/70 00:00      
               TO92            01/01/70 00:00      
                  its working!            01/01/70 00:00      
         No current            01/01/70 00:00      
      The TR is not saturating ??            01/01/70 00:00      
   converting 5volts 12 volts            01/01/70 00:00      
      Pithy phrase            01/01/70 00:00      
   Seems making Ultrasonics...            01/01/70 00:00      
   Push-pull needed?            01/01/70 00:00      
   5volts to 12 volts            01/01/70 00:00      
      Inversion...            01/01/70 00:00      
    ttl amplification            01/01/70 00:00      
      did you read the 3rd post ?            01/01/70 00:00      

Back to Subject List