| ??? 01/20/05 04:43 Read: times |
#85356 - No current Responding to: ???'s previous message |
Rob
If you realy get 5V at the base there is no current throu BE so check signal on E. Is it grounded or do you get some signal there. Driving a transistor is no problem for the controller as you see the signal on the base side of thr resistor more than 0,6V the problem is on this side. Have fun Peter |
| Topic | Author | Date |
| amplifying port output signal to 12v dc | 01/01/70 00:00 | |
| Transistor driving | 01/01/70 00:00 | |
| use an op-amp | 01/01/70 00:00 | |
| Hardly - | 01/01/70 00:00 | |
| Tell us the name | 01/01/70 00:00 | |
| micro and transistor | 01/01/70 00:00 | |
| RTFM | 01/01/70 00:00 | |
| Atmel T89C51CC02 | 01/01/70 00:00 | |
| it should be fine | 01/01/70 00:00 | |
| Both of them. | 01/01/70 00:00 | |
| stop guessing | 01/01/70 00:00 | |
| Seems to be an impossible situation | 01/01/70 00:00 | |
| Seems to me | 01/01/70 00:00 | |
| thats right | 01/01/70 00:00 | |
| 01/01/70 00:00 | ||
| i have the data sheet | 01/01/70 00:00 | |
| maximum | 01/01/70 00:00 | |
| OK That's right but... | 01/01/70 00:00 | |
| Load Lines | 01/01/70 00:00 | |
| Basic transistor theory | 01/01/70 00:00 | |
| 5 volt wave to base | 01/01/70 00:00 | |
| TTL ? | 01/01/70 00:00 | |
| maybe it's an error... | 01/01/70 00:00 | |
| yes | 01/01/70 00:00 | |
| TO92 | 01/01/70 00:00 | |
| its working! | 01/01/70 00:00 | |
| No current | 01/01/70 00:00 | |
| The TR is not saturating ?? | 01/01/70 00:00 | |
| converting 5volts 12 volts | 01/01/70 00:00 | |
| Pithy phrase | 01/01/70 00:00 | |
| Seems making Ultrasonics... | 01/01/70 00:00 | |
| Push-pull needed? | 01/01/70 00:00 | |
| 5volts to 12 volts | 01/01/70 00:00 | |
| Inversion... | 01/01/70 00:00 | |
| ttl amplification | 01/01/70 00:00 | |
did you read the 3rd post ? | 01/01/70 00:00 |