| ??? 09/26/08 08:57 Read: times |
#158601 - high speed? Responding to: ???'s previous message |
Software-driven SPI is easy for the master. But it can be a real pain for the slave, since the slave doesn't have any possibility of adjusting the speed of the communication.
Do you have control of the master side? You must be able to guarantee that the master never runs faster than what your slave code can handle. MOSI and MISO are quite easy to remember. MOSI = Master Out, Slave In MISO = Master In, Slave Out |
| Topic | Author | Date |
| SPI slave | 01/01/70 00:00 | |
| high speed? | 01/01/70 00:00 | |
| sory for late replay. | 01/01/70 00:00 | |
| SPI clock | 01/01/70 00:00 | |
| not sure.. | 01/01/70 00:00 | |
| the worst possible approach | 01/01/70 00:00 | |
| SPI Slave Response | 01/01/70 00:00 | |
| further explanation? | 01/01/70 00:00 | |
| Fixed speed | 01/01/70 00:00 | |
| SPI Timing Diagrams | 01/01/70 00:00 | |
| UART Mode 0 - SPI like Serial Shif register | 01/01/70 00:00 | |
| uhm | 01/01/70 00:00 | |
| to joe | 01/01/70 00:00 | |
| your point? | 01/01/70 00:00 | |
| you can't fail with software master | 01/01/70 00:00 | |
| Unanswerable! | 01/01/70 00:00 | |
| really? | 01/01/70 00:00 | |
| Intended for/usable for not always identical | 01/01/70 00:00 | |
| consideration? | 01/01/70 00:00 | |
| Some Questions | 01/01/70 00:00 | |
| whichever you choose | 01/01/70 00:00 | |
| low cost? | 01/01/70 00:00 | |
| if you do not use an interrupt | 01/01/70 00:00 | |
| polling? | 01/01/70 00:00 | |
| bits/s not packet size | 01/01/70 00:00 | |
| speed? | 01/01/70 00:00 | |
| bits/s not packet size! | 01/01/70 00:00 | |
| 500ms? | 01/01/70 00:00 | |
| here | 01/01/70 00:00 | |
| Yes - I agree | 01/01/70 00:00 | |
| issues | 01/01/70 00:00 | |
| UART! | 01/01/70 00:00 | |
| Not complex - just requiring low baudrate | 01/01/70 00:00 | |
| kind of rcorrect | 01/01/70 00:00 | |
| Complexity contra recommendable | 01/01/70 00:00 | |
| answer | 01/01/70 00:00 | |
| as i said | 01/01/70 00:00 | |
| lots of them | 01/01/70 00:00 | |
mcu with spi, right here in the thread | 01/01/70 00:00 | |
| CodeArchitect. ? | 01/01/70 00:00 | |
| no | 01/01/70 00:00 | |
| ahhh | 01/01/70 00:00 | |
| simulating SS? | 01/01/70 00:00 | |
| Interrupts are slower than tight polling | 01/01/70 00:00 | |
| wow | 01/01/70 00:00 | |
| all about worst-case | 01/01/70 00:00 | |
| thanks... | 01/01/70 00:00 | |
| missed interrupts | 01/01/70 00:00 | |
| correct me.. | 01/01/70 00:00 | |
| Fast interrupts | 01/01/70 00:00 | |
| thanks... | 01/01/70 00:00 | |
| An Alternative... | 01/01/70 00:00 | |
| Some Descriptive Information | 01/01/70 00:00 | |
| AT89LP2052 has HW SPI | 01/01/70 00:00 |