| ??? 10/03/08 10:36 Read: times |
#158794 - SPI Timing Diagrams Responding to: ???'s previous message |
Draw out the SPI timing diagrams..... for data transfer.
You will see that the SPI slave micro 2051 has to respond to the SPI master clock edges to manually clock in the data.... IE you have to write your own master and slave bit by bit SPI functions... what pain! (there's no SPI hardware in the 2051) Hence the 2051 slave must detect each rising and falling edge of the 2051 master clock..... If the slave misses one of the clock edges... then data will be corrupted! The faster your master clock goes - the more time critical SPI slave becomes. Joe |
| Topic | Author | Date |
| SPI slave | 01/01/70 00:00 | |
| high speed? | 01/01/70 00:00 | |
| sory for late replay. | 01/01/70 00:00 | |
| SPI clock | 01/01/70 00:00 | |
| not sure.. | 01/01/70 00:00 | |
| the worst possible approach | 01/01/70 00:00 | |
| SPI Slave Response | 01/01/70 00:00 | |
| further explanation? | 01/01/70 00:00 | |
| Fixed speed | 01/01/70 00:00 | |
| SPI Timing Diagrams | 01/01/70 00:00 | |
| UART Mode 0 - SPI like Serial Shif register | 01/01/70 00:00 | |
| uhm | 01/01/70 00:00 | |
| to joe | 01/01/70 00:00 | |
| your point? | 01/01/70 00:00 | |
| you can't fail with software master | 01/01/70 00:00 | |
| Unanswerable! | 01/01/70 00:00 | |
| really? | 01/01/70 00:00 | |
| Intended for/usable for not always identical | 01/01/70 00:00 | |
| consideration? | 01/01/70 00:00 | |
| Some Questions | 01/01/70 00:00 | |
| whichever you choose | 01/01/70 00:00 | |
| low cost? | 01/01/70 00:00 | |
| if you do not use an interrupt | 01/01/70 00:00 | |
| polling? | 01/01/70 00:00 | |
| bits/s not packet size | 01/01/70 00:00 | |
| speed? | 01/01/70 00:00 | |
| bits/s not packet size! | 01/01/70 00:00 | |
| 500ms? | 01/01/70 00:00 | |
| here | 01/01/70 00:00 | |
| Yes - I agree | 01/01/70 00:00 | |
| issues | 01/01/70 00:00 | |
| UART! | 01/01/70 00:00 | |
| Not complex - just requiring low baudrate | 01/01/70 00:00 | |
| kind of rcorrect | 01/01/70 00:00 | |
| Complexity contra recommendable | 01/01/70 00:00 | |
| answer | 01/01/70 00:00 | |
| as i said | 01/01/70 00:00 | |
| lots of them | 01/01/70 00:00 | |
mcu with spi, right here in the thread | 01/01/70 00:00 | |
| CodeArchitect. ? | 01/01/70 00:00 | |
| no | 01/01/70 00:00 | |
| ahhh | 01/01/70 00:00 | |
| simulating SS? | 01/01/70 00:00 | |
| Interrupts are slower than tight polling | 01/01/70 00:00 | |
| wow | 01/01/70 00:00 | |
| all about worst-case | 01/01/70 00:00 | |
| thanks... | 01/01/70 00:00 | |
| missed interrupts | 01/01/70 00:00 | |
| correct me.. | 01/01/70 00:00 | |
| Fast interrupts | 01/01/70 00:00 | |
| thanks... | 01/01/70 00:00 | |
| An Alternative... | 01/01/70 00:00 | |
| Some Descriptive Information | 01/01/70 00:00 | |
| AT89LP2052 has HW SPI | 01/01/70 00:00 |