??? 07/31/08 01:06 Read: times |
#157150 - Narrowing it down Responding to: ???'s previous message |
Ok you have 16 Analog inputs and need an Analog Multiplexer For example 74HC4067. If the inputs are high impedance you will need an Op-amp. How many bit A/D do you need 8,10,12? What kind of accuracy and resolution. The outputs are 0 / 5 Volts as in CMOS or TTL? connected to what? you may need drivers.
More important What do you have in skills? Does your group have any software skills? with what? What about hardware? Who will design and layout this board? Why did you choose this particular chip? Do you have any tools like programmers , emulators , IDE's, ect. I ask this because you may want to buy a development board. If you can find one that suits your needs. As far as the CPU Is am not sure if there are any easy BASIC setups for the 8052 (Anyone) A packaged solution like the BASIC Stamp may be easier. Do you want to learn anything, or just get it done? Define a small budget $50, $100 $250 USD? In the end your task is read 16 analog inputs - sort them, then set 16 digital outputs based on the sort. Assuming the H/W is not too elaborate I would say it should be less than 16 hours maybe less than 8. |