| BUS | | 01/01/70 00:00 |
| does not make sense, pls explain | | 01/01/70 00:00 |
| 100 mils width is too small | | 01/01/70 00:00 |
| Use 8052.com | | 01/01/70 00:00 |
| in one direction, in the other it is .100 | | 01/01/70 00:00 |
| Drilling holes with 100 mil pitch should not be... | | 01/01/70 00:00 |
| None at all! | | 01/01/70 00:00 |
| The largest drill diameter is 0.050" | | 01/01/70 00:00 |
| It's all coming back... | | 01/01/70 00:00 |
| What do you mean "coming back?" It's still here! | | 01/01/70 00:00 |
| the rest of us regard this a trip down memory lane | | 01/01/70 00:00 |
| Yes, paper clips, zippers ... they're still around | | 01/01/70 00:00 |
| yup, slow things down | | 01/01/70 00:00 |
| It is 0.80mm NOT 0.080" | | 01/01/70 00:00 |
| One's too small, the other's too large | | 01/01/70 00:00 |
| It\'s really not too small ... | | 01/01/70 00:00 |
| Terms; Width v Pitch | | 01/01/70 00:00 |
| if it is all or none | | 01/01/70 00:00 |
| I'm using a Single Sided board... | | 01/01/70 00:00 |
| I don't understand... | | 01/01/70 00:00 |
| yes | | 01/01/70 00:00 |
| If you mean what I think you mean. | | 01/01/70 00:00 |
| use an IC socket then... | | 01/01/70 00:00 |
| a good ides does not suffer from being repeated | | 01/01/70 00:00 |
| I missed that, sorry... | | 01/01/70 00:00 |
| what is a "component platform"? | | 01/01/70 00:00 |
| thanks | | 01/01/70 00:00 |
| here we go | | 01/01/70 00:00 |
| oh now I remeber | | 01/01/70 00:00 |
| they are available in 0.3" as well | | 01/01/70 00:00 |
| nowadays, ridiculously small is REALLY small | | 01/01/70 00:00 |
| Broken bit. | | 01/01/70 00:00 |
| PCB Prototyping | | 01/01/70 00:00 |
| Drilling... | | 01/01/70 00:00 |
| great, Rob | | 01/01/70 00:00 |
| 1 sided... | | 01/01/70 00:00 |
| you are aware, I hope | | 01/01/70 00:00 |
| SiLabs, etc... | | 01/01/70 00:00 |
| not at all | | 01/01/70 00:00 |
| So is the 89C51ED2 | | 01/01/70 00:00 |
| there are PLCC sockets that spread the pins to 0.1 | | 01/01/70 00:00 |
| Yep. | | 01/01/70 00:00 |
| ok | | 01/01/70 00:00 |
| you don't have a proper devboard | | 01/01/70 00:00 |
| Devboard | | 01/01/70 00:00 |
| do yourself a favor | | 01/01/70 00:00 |
| Thanks | | 01/01/70 00:00 |
| There are adapter boards that make it easy | | 01/01/70 00:00 |
| You can add a groundplane! | | 01/01/70 00:00 |
| not just Kai | | 01/01/70 00:00 |
| SiLabs vs Atmel | | 01/01/70 00:00 |
| elaborating | | 01/01/70 00:00 |
| deviates | | 01/01/70 00:00 |
| the problem there is | | 01/01/70 00:00 |
| diffs twixt SiLabs families | | 01/01/70 00:00 |
| To Andy | | 01/01/70 00:00 |
| LPC9xx??? | | 01/01/70 00:00 |
| RCAP2 vs TMR2RL | | 01/01/70 00:00 |
| acronyms... | | 01/01/70 00:00 |
| If that had been it | | 01/01/70 00:00 |
| F120 not genuine either | | 01/01/70 00:00 |
the difference is 'addition' vs 'change' | | 01/01/70 00:00 |
| SMT Soldering is MUCH easier than PWB drilling. | | 01/01/70 00:00 |
| wrong address | | 01/01/70 00:00 |
| surface mount thru-hole | | 01/01/70 00:00 |
| Original SMT parts were modified DIP | | 01/01/70 00:00 |
| True but... | | 01/01/70 00:00 |
| The objective wasn't to make them smaller. | | 01/01/70 00:00 |
| O-Who? | | 01/01/70 00:00 |
| Just to follow up... | | 01/01/70 00:00 |
